36
Copyright © 2021 China Starwin
Figure 7-13: ACU IP Parameters Configuration
NOTE: If the default V9 OTM45 ACU IP address and/or Port number are modified,
change
the PC Network configuration correspondingly and update ACU IP address and
Port number in M&C Application Connection parameters (Figure 7-14).
Figure 7-14: ACU IP Address and Port Number in M&C Application
Search Settings
submenu item opens the interface form with parameters required
for satellite searching (Figure 7-15):
-
Satellite Longitude
- satellite position at geostationary orbit,
Values:
E
(East) or
W
(West); Range: 0 - 180°.
-
Mode
- the internal receiver operational mode.
Values:
Beacon
,
DVB
(TV Carrier),
Signal Carrier
(DVB-S/S2/S2X Constant Coding and Modulation Carrier).
- Polarization
- polarization of the receive channel signal.
Values:
V
(Vertical) or
H
(Horizontal).
- Frequency
- receive channel frequency in MHz,
- Symbol rate
– receive channel Symbol Rate in Ksymb/s
Select and enter parameters to initiate the satellite searching, and click
Set
button.
The applied settings displayed in
Event Log
,
located at the bottom of the M&C
Application interface.
Figure 7-15: Satellite Search Settings
