STARVILLE LED Flood Panel 150, Руководство пользователя

Страница: 33 / 52

This setting is only relevant if the device is controlled via DMX.
Press
[Mode] repeatedly until the display shows ‘d.xxx’ .
Now you can set the number of the first DMX channel to be used by the device (DMX address).
Use [Up] and [Down] to select a value in a range of ‘d.001’ … ‘d.512’ .
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible DMX address for the various DMX modes
Mode Highest possible DMX address
3-channel 510
4-channel 509
8-channel 505
Press [Setup] . With [Up] and [Down] you can now select one of the following DMX operating
modes:
n
‘3-ch’ (three channels)
n
‘4-ch’ (four channels)
n
‘8-ch’ (eight channels)
DMX mode
Operating
LED Flood Panel 150
33