STARVILLE DJ-X 16, Руководство пользователя

Страница: 10 / 16

STAIRVILLE • DJ-X 16 DMX CONTROLLER
10
www.thomann.de
Instructions for foot controller
1. STAND BY button Press to change the STAND BY status
causing its indicator to change from flashing
to off or from off to flashing.
2. FULL ON button Press this button down, channel 1 to
channel 8 are full on and not controlled by
STAND BY
3. STEP

button In CHASE mode, press to execute the
pattern by one step. Pressing for more than
one second would execute the pattern by 10
steps per second.
4. PATTERN

button In CHASE mode, press to select pattern by
plus one, press for more than one second
would increase the pattern quickly till the
maximum and then increase from 01.
5. CONTROL OUTPUT cable Connect to the FOOT CONTROL socket
located on the rear of unit.
MIDI setting
1. NOTE DATA
NOTE NUMBER VELOCITY FUNCTION
22-81 master level for the
pattern
turn on/off 1-60 patterns
82-97 channel dimmer identical to that set by
FLASH1-16
99 FULL ON
101 execute the pattern by
one step
102 change the STAND BY
status
2. If MIDI signal disappears, 10 minutes later the matching indicator is off
and the MIDI settings are dumped.
3. To receive MIDI signal, set the MIDI channel according to the setting
of the MIDI controller.
4. The patterns turned on by MIDI are not controlled by LEVEL knob
and not shown in the LCD. All turned on patterns are executed
synchronously and the terminal level is synchronised by the levels of
the turned on patterns.