background image

Instruction manual

8

Complete an asynchronous copy

When you complete an asynchronous copy, the USB flash drives are copied or 

compared independently, one at a time. When the green LED indicator next to a USB 

flash drive stops blinking, you can remove the USB flash drive even if the other USB 

flash drives are not done being copied or compared.

Note: 

If the data size of the source USB flash drive is larger than the system’s buffer 

memory, the system will automatically copy in synchronous mode.

Caution!

 To avoid any copying errors, the source USB flash drive should be larger than 

or the same size as the destination USB flash drive.
1.  Use the Power switch to turn on the duplicator and eraser.
2.  If necessary, change any of the copying settings (for example, copy area, copy 

speed, target tolerance, and so on).

3.  Insert the source USB flash drive into the Source USB flash drive port.
4.  Insert up to 15 destination USB flash drives into the Destination USB flash drive 

ports.

5.  Highlight 

Copy 

and press the OK button.

6.  If a confirmation message appears, press the OK button.
7.  When the green LED indicator stops blinking, you can remove the destination USB 

flash drive and insert another USB flash drive and the process will continue.

8.  To check the copy status and progress for each of the USB flash drives, use the UP 

and DOWN buttons to move through the USB flash drive ports.

Warning!

 

If the green LED indicator is blinking, do not remove the USB flash drive. If 

you do so, you will interrupt the copying process and you could experience lost or 

corrupted data as a result.

Interrupt the copying process

1.  To stop the copying process while it’s in progress, do one of the following:

•  To stop copying data to the slowest USB flash drive port, press and hold the UP 

and DOWN buttons for 5 seconds.

•  To stop copying data to all of the USB flash drive ports, press and hold the ESC 

button for 5 seconds.

Содержание USBDUPE115
























Отзывы: