6
Monitoring Your Card
The LEDs on the front of the card are the best indication of the card’s activity.
If neither Link/Activity LED is lit, there is a connection error. Make sure that all devices
are turned on and that the network cable is properly connected at both ends. Also make
sure that your network cables comply with EIA/TIA 568 and Category 5 specifications.
If problems persist, power down all devices and disconnect all plugs. Wait at least ten
seconds then plug the devices back in and power them up.
LED
Color
Status
Description
10M/Link/Activity
Yellow
On
Card is in 10Mbits/sec mode
Blinking
Network activity
100M/Link/Activity
Green
On
Card is in 100Mbits/sec mode
Blinking
Network activity
Содержание ST100S
Страница 12: ...Revised April 22 2003...
