StarTech.com ST100S, Инструкция по эксплуатации

Страница: 5 / 12

3
Contents
This package should contain:
• 1 x PCI Ethernet Adapter card
• 1 x driver disk
Installation
This section will guide you through the installation of your card and the related
software. Please read through the instructions carefully and complete each step in the
order listed.
Installing the Card
1. Make sure that your system is unplugged and you are grounded.
2. Remove the cover of your system (see your computer's user manual for details, if
necessary) and gently turn your computer onto its side.
3. Locate an empty PCI slot (usually white in colour) and remove the metal plate that
covers the rear bracket. You may need a Phillips screwdriver to perform this step.
Hang on to the screw!
You will need it to secure the card later.
4. Gently insert the card into the empty slot, making sure it is firmly seated.
5. Secure the card in place using the screw you removed in Step 3.
6. (ST100SW ONLY) Connect the Wake-On-LAN (WOL) connector to the WOL plug on
your motherboard. Consult your motherboard user guide for information, if
necessary.
7. Put the computer case back on.