StarTech.com ST100S, Инструкция по эксплуатации

Страница: 7 / 12

5
Windows 95
1. Windows will automatically detect the new hardware. Click Next.
2. Select “Driver from disk provided by hardware manufacturer.”
3. Insert the driver disk into your disk drive and specify the following path (where
“A:\” is the location of your driver disk):
•A:\WIN95
Windows NT 4.0
1. From your Control Panel, double-click on the Network icon.
2. Choose Add Adapters and select “<Other> Requires disk from manufacturer.”
3. Insert the driver disk into your disk drive and specify the following path (where
“A:\” is the location of your driver disk):
• A:\WINNT4
4. The “Select line speed” dialog box will appear. The default is “Auto”, where the
adapter will auto-detect the line speed. You can choose to set the value to 10 (half- or
full-duplex) or 100 (half- or full-duplex) Mbps if you so choose.
5. The “Input Ethernet ID” dialog box will appear. This option is only required if you
have more than one Fast Ethernet adapter on the computer. Choose “Skip” if you
have only one adapter installed. If you are adding more than one Fast Ethernet
Adapters, consult the Msnt.txt file located in the Txt\Ms folder for additional
instructions.
6. The “Bus Location” dialog box will appear. If your machine contains more than one
hardware bus, please select the Bus Type and Bus Number where the network
adapter is installed.
7. Follow any additional on-screen prompts and reboot your computer to complete the
installation process.