Instruction Manual
24
c) The message information can be customized to suit the end-user’s needs.
The Daemon can extract the following data from the SiI 4726 hardware:
$B - Box Serial Number
$DS - Drive Serial Number
$DN - Drive ID [slot #]
$V - Current Volume
$T - Current Temperature
$SF - System Fan OK Flag
$PSF - Power Supply Fan OK Flag
d) If there is information that the end-user would like included in the error
message, it can be entered by typing in a selected message code listed
above.
For instance: to put in the
Box Serial Number
, type in the descriptive text
followed by the message code as demonstrated below.
SiI4726: $B
Drive Slot: #$DN
Temperature: $T
System Fan Speed: $SF
Power-Supply Fan Speed: $PSF
Box Serial Number: $B
The drive was unplugged.
Install New Firmware & Software
Warning
: Do not power off or access the Drive Enclosure while upgrading
firmware. Please note that this process may take several minutes.
1. Click the
Specify Firmware
toolbar button or select
Specify Firmware
from the
Edit
menu of the
Status
window. The
Firmware Selection
dialog displays all of the
SAT3550ESR Drive Enclosures attached to the host, the integrated circuit (IC)
revision, and the current firmware installed on each Drive Enclosure (assuming more
than one SAT550ESR is in use).
2. Select the SiI 4726 Drive Enclosure that requires a firmware upgrade.
3. Click the
Browse
button next to the
Update Firmware from File
text box, navigate to
the new firmware file you wish to load from a CD or hard disk drive, and select the .bin
file.
4. Click
Install Firmware
to begin the upgrade.
