Instruction Manual
8
Setting
The network settings for the WiFi
Enclosure can be configured from this
section. Settings specific for each mode
can be accessed by clicking on the
appropriate link/image. For AP mode,
the wireless network name (SSID),
security settings and IP addresses and
WAN Port can be configured. For Client
Scan mode, the list of available wireless
networks and preferred networks (saved
settings) will be listed.
AP Mode
Client Scan Mode
Account Setting
Up to 8 new user accounts can be created
from this section. Permissions can also
be set for each user account for the web
interface, SMB and FTP. If you wish to
setup DDNS, this can also be configured
from this section.
NOTE:
It is recommended to change the
default Admin account password.