Instruction Manual
5
Windows 2000
1. When the Found New Hardware Wizard appears, click Next to advance to the next window.
2. Select Search for a suitable driver for my device (recommended) and click Next.
3. Check Specify a location, and remove all other checkmarks from this window.
4. Insert the Driver CD, and enter the following path in the text line beneath Copy
manufacturer’s files from:
For PEX1PECP : D:\PCIe\1P\2000
For PEX2PECP : D:\PCIe\2P\2000
Alternatively, you can click on the Browse button, and locate the file according to the path
specified above.
Once the correct folder has been selected, please click on the OK button to advance.
5. Click Next, to approve the installation. Click Finish, once the installation has completed.
Windows 2003 Server
1. At the Found New Hardware Wizard, select Install from a list or specific location (Advanced),
then click Next.
2. Insert the Driver CD, and select Search for the best driver in these locations. Place a
checkmark next to Include this location in the search, and remove any other checkmarks from
this page.
3. In the text box provided, type in:
For PEX1PECP : D:\PCIe\1P\2003
For PEX2PECP : D:\PCIe\2P\2003
Alternatively, you can click on the Browse button, and locate the file according to the path
specified above.
4. Once the correct folder has been selected, please click on the Next button to advance.
5. If you receive a notification that the drivers you are installing have not yet passed Windows
Logo Testing, please click on Continue Anyway, followed by Finish. Please note that the
software included with PEX1PECP/PEC2PECP has been thoroughly tested for stability and
compatibility.
You will be required to follow steps 1-5 again, following the initial installation. Please repeat
these steps to complete installation.