Instruction Manual
4
Verifying installation
To verify that the installation has completed successfully and that the newly installed ports are
now available:
1. Right click on My Computer, left-click on Manage. Select Device Manager.
2. Click on the [+] sign next to Ports (COM & LPT). Here, you should see the newly installed
parallel port(s) as well as a Multifunction adapter, as shown below:
Parallel Port Address configuration
Some parallel devices require a specific port designation, in order for the devices to function
properly. If your peripherals are functioning correctly with the newly installed ports, there is no
need to modify the parallel port address. However, if you are experiencing difficulties:
1. From the Device Manager window, double-click Ports (COM & LPT), then double-click the
NetMos PCI ECP Parallel Port.
2. Select the Port Settings tab.
3. At the LPT Port Number box, click on the down arrow and select an LPT port that is not in use:
Following this selection, please click on OK to
save your changes.
