4. Repeat the above step for the rest of the Network Drives you wish to bind. Click
Finish
.
5. You will then receive two error messages:
6. Once you have read the error messages and are prepared, click
Yes
and
OK
respectively.
Unbind:
Used to unbind Network Drives
Instructions for unbinding Network Drives
1. Go to
NDAS Device Management
and
select the device you wish to unbind.
2.
Unmount
the Network Drive by clicking
on
Unmount
.
3. After unmounting the Network Drive(s),
go to
NDAS Bind Management
.
4. From the Bind Management utility, select
the bound Network Drives that were just
unmounted. Click the
Unbind
button.
5. The
Unbind
window will then appear,
indicating the drives that are to be
unbound. If the drives listed are correct,
click
Yes
.
Instruction Manual
11
