background image

Table of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Assembling Your Computer  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Technical Support  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Warranty Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1

Installing a Rear Fan

NOTE:

Please refer to your fan manufacturer’s installation procedures to ensure proper

installation of the fan. Rear fans should be installed/configured so that the warm air
from inside the case is being exhausted out of the computer. 

1. Position your fan so that the screw holes on the fan are aligned with the screw holes 

on the back of the case. 

2. Screw the fan into place, with the heads of the screws outside of the case.

3. Connect your fan to your motherboard as instructed by your fan and motherboard 

manufacturers instructions.

Removing the Expansion Slot Covers

You will need to remove an expansion slot on the back of your computer when you want
to add a FireWire card, sound card, etc. to your computer.

1. Remove one of the expansion slot covers by tapping it forcefully towards the inside 

of the case.

2. Install your expansion card as directed by the manufacturer.

Powering Your Computer

1. Make sure that the red voltage indicator at the back of your computer is in the proper

position (115V for North America and 230V for most European countries).

2. Plug one end of the power cord into the computer and the other into an available 

wall socket.

6

Dimensions

7.5 (w) x 16.75 (l) x 24.5 (h) in.

Weight

26 lbs.

Power Supply

350 Watt 12V ATX

Power Supply Connectors

5 x 4-pin LP4 female
2 x small internal power
1 x 20-pin ATX motherboard adapter
1 x 4-pin extended ATX power 12V
1 x Aux plug for Pentium 4

Power Supply Certification

CSA, UL, FCC, CE, TUV

Motherboards Accepted

12.0 x 9.6 in. Standard ATX (including P4)

Expansion slots

Seven

Bays

Six external 5.25”
Two external 3.5”
Three internal 3.5”

LEDs

Power (Green)
Hard drive activity (Yellow)

Product Specifications

Отзывы: