Starrett PKG08806-UMDFG, Руководство пользователя

Страница: 14 / 36

14 PKG08806-UMDFG
ENGLISH
3.4.3 USING MTH TEST FRAME
The force gage mounts to the MTH Manual Tester using four M4 screws.
3.5 LOAD SENSOR MEASUREMENT
The load cell sensor, within the force gage housing, has a measurement
accuracy of better than 0.1% full scale and a safe overload rating of
200%. Force gages with a load capacity of 200 lbf (1000N) and below
are fitted with an M6 threaded load stem. The 500 lbf (2500N) force
gage model is fitted with an M10 threaded load stem.
NOTE
1. Load must always be applied axially. Use care and prevent
any side loading on the sensor. Side loading can affect the
measurement accuracy and lead to load cell damage.
2. Load cell sensors should NEVER
exceed their rated full scale capacity.
Overloading the load cell sensor will
lead to irreparable damage.
3. Load cell should go through a 10 minute
"warm-up" period if the force gage has
been turned off for an extended period
of time. Turn the force gage on and wait
10 minutes for the load cell electronics
to warm-up.
3.6. USING ACCESSORIES
The DFG Force Gage can use standard gage accessories for common
types of testing. Or, you can equip the DFG force gage with a clevis
adapter. With a clevis adapter, a large assortment of testing fixtures
are available from Starrett including platens, vise-action grips, wedge-
action grips, peel grips, pneumatic grips, roller grips and more.
Starrett can supply hundreds of different style grips for virtually any
force measurement application. And Starrett can design, engineer, and
manufacture custom grips and test fixtures to your exact requirements.
A complete list of accessories can be found in Section 6.
3.6.1 STANDARD GAGE ACCESSORIES
The force gage is supplied with a variety of standard accessories suitable
for the full scale measuring capacity of the instrument. All gages are
supplied with these threaded accessories. Accessories are supplied as
"Kits" or you may purchase any accessory individually.
3.6.2 CLEVIS ACCESSORIES
The DFG Force Gage can be fitted with an optional clevis adapter. This
adapter lets you affix any 15.9mm diameter clevis-style test fixture to
your force gage.
Clevis fixtures are ideal for applications where you need to quickly
change-out test fixtures. The clevis adapter, screws on to the DFG load
cell stem. Two locking rings and a grip pin are used to secure the test
fixture during your test.
Force Gage Mounted on MTH-550 Test Frame
Force Gage Load Cell Stem Thread
Force Gage Standard Accessory Kit
Optional Clevis Accessory Kits