Starrett PKG08806-UMDFG, Руководство пользователя

Страница: 22 / 36

22 PKG08806-UMDFG
ENGLISH
5.4 TOLERANCE
Use tolerances to setup "pass" and "fail" measurements. You may
specify a Limit 1 and a Limit 2 to create a tolerance band. Measured
results that equal or fall within the range created by the two limits are
considered "pass" results. This results will display in BLACK. If the
measured result falls outside the band created by the two Limits, the
result is considered a "fail" result. A "fail" results displays in RED.
5.4.1 SETTING TOLERANCE LIMITS
When Tolerance is used, you must setup two Limits that define the
tolerance range. Enter a value for Limit 1 and Limit 2 making sure your
limits are of the same sign for tension or compression.
Tolerance
Enabled
On
Off
Tolerance
Enabled Off
0.00
0.00
None
Limit 1
Limit 2
Sound
Limit 1
N
10.00
Limit 2
N
20.00
Tolerance
Enabled On
10.00
20.00
None
Limit 1
Limit 2
Sound
Tolerance Setup Menu
Press q Move down to TOLERANCE
Press u Select ENABLE if needed or,
Press
u
Select DISABLE if not needed
Press
q
Move down to LIMITS
Press
q
Move down to LIMIT 1
Press u Select Limit 1 value using qp
Press t Move out of Limit 1
Press
q
Move down to LIMIT 1
Press
u Select Limit 2 value using qp
Press
t
Move out of LIMIT 2
Press t Move out of TOLERANCE
Tolerance Limit Setup