STARPLUS Triad 1 Скачать руководство пользователя страница 154

Страница: 154 / 496

5-40

Intercom Transfer

Chapter 5 - Electronic Telephone Operation

Answering an Intercom Call

With your intercom signal in the T Mode, you hear repeated bursts of intercom tone ringing
and the HOLD button slowly flashes.

1. Lift the handset or press the MUTE button to answer,

-or-

Move the intercom signal switch to the H mode to reply.

2. Replace the handset to end the call.

In the P Mode

, you hear three bursts of tone and one-way announcement. The calling party

cannot hear conversations in progress.

Lift the handset or press the MUTE button to answer,

-or-

Move the intercom signal switch to the H mode to reply.

In the H Mode

, you hear three bursts of tone and an announcement.

Reply handsfree or lift the handset for privacy.

Intercom Transfer

For Intercom Transfer Without DSS Buttons:

1. Receive or make an intercom call.

2. Press the TRANS button. Intercom dial tone sounds.

3. Dial the station where the call is to be transferred.

4. When the 2nd station answers, you are in a supervised transfer mode (1st station is

staged for transfer).

5. Hang up (station 1 and 2 are connected).

For Intercom Transfer Using DSS Buttons:

1. Receive or make an intercom call using a DSS button.

2. Press the TRANS button. Intercom dial tone sounds.

3. Press the DSS button where call is to be transferred.

4. Hang up (station 1 and 2 are connected).

Last Number Redial (LNR)

1. Press the SPEED button.

2. Press the pound [#] key. The last number dialed over an outside line is automatically

redialed. The system automatically selects the original line used to place the call and
redial the number.

If that line is busy, the system automatically selects another line from the same group
and redial the number.

If no lines are available in the same group, the station receives a busy tone and can
queue for a line.

Содержание Triad 1

















































































































































































































































































































































































































































































































Результаты поиска

Содержание Triad 1

Отзывы:

Бренды по названию

Популярные бренды

STARPLUS Triad 1, Руководство по описанию продукции

Результаты поиска

Содержание Triad 1

Отзывы:

Бренды по названию

Популярные бренды