STARPLUS Triad 1, Руководство по описанию продукции

Страница: 120 / 496

5-6 Answering a Recall
Chapter 5 - Electronic Telephone Operation
When verified account codes are forced, station MUST enter an account code to dial a
number that is restricted through station COS and toll restriction. An account code is not
required for calls that are not restricted through station COS and toll restriction.
When verified account codes are not forced, a station user may place a call without
entering an account code. In this case, the station user's COS is based on their station
COS. In this case, a user can enter a verified account code to upgrade their COS.
Verified Account Codes does not function with Redial feature.
Answering a Recall
When an outside line remains on hold for an extended time period, a recalling ring reminder
is sent. (If Preferred Line Answer is enabled, skip Step 1.)
1. Press outside line, LOOP or POOL button flashing at very fast rate.
2. Lift handset or press ON/OFF button to converse.
Answering Machine Emulation
When a call is sent to a voice mailbox, the station associated with the mailbox can press a
preprogrammed button to listen to the caller leaving the voice mail message. If the mailbox
owner decides to speak with the caller, they can press the preprogrammed button to be
connected to the caller.
Notification Methods
Two methods of notification are available, a Ring Mode or a Speaker Mode. These methods
are controlled by the type of flexible button assigned on the telephone.
EXAMPLE -- Station A places their phone in the answering machine mode by pressing the
flexible button programmed on the telephone. The button light is solid red. Whatever button
type is assigned on the telephone defines the operation mode of the feature.)
When an incoming CO call rings at a station and forwards (except busy type) to the station’s
voice mailbox:
In RING MODE, the preprogrammed answering machine flex button flashes at 480 ipm
red while the caller is in the owner’s mailbox. The mailbox owner presses the
preprogrammed flashing button and the audio is broadcast over the speaker of the
keyset. The mute key is enabled on the keyset at this point. The LED light is solid red.
In SPKR MODE, the voice mail message is broadcast over the speaker. The mute key is
enabled on the keyset and the LED light is solid red.