45
6.2 From
CamBall
Manager
y
Connect CamBall to your PC using the USB
cable. The top, bottom, left, and right
indication lamps will turn on
Red
+
Green
to
indicate that CamBall has been recognized
and is being charged.
y
From the PC, run CamballManager3.exe
(inside the CD-ROM) and CamBall Manager’s
main menu will pop up.
y
Changes made from CamBall Manager will
only take effect after pressing Apply or OK
button.
6.2.1 Language
-
Select the desired language from Language
Set and then click Apply.
6.2.2 Camera
Settings
6.2.2.1. Brightness
-
Choose Camera Set>Brightness and adjust
the brightness level using the sliding bar. Click
Apply.
-
Configurable range is between 1 and 20, and
the default setting is 9.
6.2.2.2. Contrast
-
Choose Camera Set>Contrast and adjust the
contrast level using the sliding bar. Click
Apply.
-
Configurable range is between 1 and 20, and
the default setting is 15.
6.2.2.3. Night Mode
-
Choose Camera Set>Night Mode and check
the box and then click Apply to enable. The
default setting is On.
