Starling Technologies S-24MR-2, Инструкция по эксплуатации

Страница: 23 / 29

You can then pull the hand off and hot
glue the small hole the wire is going
through to keep it from being pulled
out.
Place the included magnet on a wand,
or wooden dowel and wave it across
Robby's hand to activate voice.
Speaker(s):
The thick plastic of this robot muffles the sound of Robby's voice if unmodified, but it may be
what you want. If using the dual board version, you can leave the click sound board speak alone
as it is quite loud.
Using a piece of .010” plastruct sheet (not
included in kit) or paper card stock, create
a cone large enough for the speaker to fit.
Tape it closed and cut a slit for the wires.
This will make the speaker extremely loud.
23