Starling Technologies S-24MR-2, Инструкция по эксплуатации

Страница: 21 / 29

And hot-glue it behind the Alpha dial.
You can fill the outer area, that you cut, with
Micro Krystal Klear or testors window maker.
Insert the 5mm warm-white LED into the glow rod. It may be labeled “STROBE” or be soldered
to the light board.
2 pairs of 3mm warm-white LEDs labeled RL and RF go to the Beta dial shown above.
Placement of each pair set of LEDs is crucial for the effect.
Analyzer Beta :Board Connection RL 2x 3mm
warm-white LEDs placed horizontal.
Analyzer Beta : Board Connection RF 2x 3mm
warm-white LEDs placed vertical.
21