background image

Handbook for the SX remote control Spectrograph    Issue 1, 17/8/20 

Dear Observer, 

Thank you for purchasing a Starlight Xpress CCD Imaging System. We are confident that you will gain much satisfaction 
from this equipment, but please read carefully the accompanying instruction manual to ensure that you achieve the best per-
formance that is capable of providing. 

As with most sophisticated equipment a certain amount of routine maintenance is necessary to keep the equipment operating 
at its optimum performance. The maintenance has been kept to a minimum, and is fully described in the manual. 

In the unfortunate instance when the equipment does not perform as expected might we recommend that you first study the 
fault finding information supplied. If this does not remedy the problem, then contact Starlight Xpress for further advice. Our 
message board service on the Starlight Xpress web site will often provide solutions to any problems. 

The equipment is covered by a 12-month guarantee covering faulty design, material or workmanship in addition to any stat-
utory Consumer Rights of Purchasers. 

CONDITIONS OF GUARANTEE 

1) The equipment shall only be used for normal purposes described in the standard operating instructions, and within the 
relevant safety standards of the country where the equipment is used. 

2) Repairs under guarantee will be free of charge providing proof of purchase is produced, and that the equipment is re-
turned to the Service Agent at the Purchaser’s expense and risk, and that the equipment proves to be defective. 

3) The guarantee shall not apply to equipment damaged by fire, accident, wear and tear, misuse, unauthorised repairs, or 
modified in any way whatsoever, or damage suffered in transit to or from the Purchaser. 

4) The Purchaser’s sole and exclusive rights under this guarantee is for repair, or at our discretion the replacement of the 
equipment or any part thereof, and no remedy to consequential loss or damage whatsoever. 

5) This guarantee shall not apply to components that have a naturally limited life. 

6) Starlight Xpress’s decision in all matters is final, and any faulty component which has been replaced will become the 
property of  Starlight Xpress Ltd. 

 

For further info. or advice, please call: 

Mr Michael Hattey, 

Starlight Xpress Ltd., 

Unit 3, Brooklands Business Park, 

Bottle Lane, 

Binfield 

Berkshire, 

England.  RG42 5QX 

Tel: 01184026898 

Email: 

[email protected]

  

Web site: 

http://www.s

xccd.com 

 
 
 

 
 
 
 
 

Содержание SX Spectrograph PRO

















Отзывы: