STARLANE POLE STAR PRO, Инструкция по установке и эксплуатации

Страница: 17 / 24

Setting the Freeze Time
Indication of how long the lap time passing over the finish line lasts can be set.
While the time of the lap just completed is shown, the system does not consider
any other impulses received by the sensor. This allows the problem of close resets
to be eliminated when uncoded transmitters are used:
Carry out the following operations
to set the Freeze Time:
1. From the main screen, keep the E key pressed for 2 seconds.
2. Press the DOWN ARROW 5 times to position yourself over the CHRONO
sub-menu.
3. Press E to enter the CHRONO sub-menu.
4. Press the DOWN ARROW once and then E to change the Freeze
Time - The asterisk appears.
5. Press the UP ARROW or DOWN ARROW to increase or decrease the
time (2 seconds minimum, 30 maximum).
6. Press E to confirm the value - The asterisk disappears.
7. Press C twice to return to the main screen.
“Best Lap” LED
The LED “BEST LAP” is a very useful indication to immediately give information on
an improvement in performance without distracting the driver by making him read
the display.
•
When the “BEST LAP” LED is permanently lit it indicates an improvement
compared with the previous lap.
•
When the “BEST LAP” LED flashes it indicates the driver’s best time of all.
Analysis of the stored times
At the end of the practice sessions, the times of 120 laps divided into 99 sessions
can be analysed. Each time the chrono is stopped and started again, a new test
session is automatically created.
Carry out the following operations to display the stored times:
1. From the main screen, keep the E key pressed for 2 seconds.
2. Press E to enter the ANALYSIS sub-menu.
The various sessions with the number of laps completed in each are listed in the
ANALYSIS sub-menu.
Page 16