StarHub ABQ-1H57-SCV, Руководство пользователя

Страница: 29 / 33

26
To receive the channels for option 2, the TV unit must be tuned to UHF Channel 67
(838Mhz to 846Mhz). You can use either the TV remote control or the button on the
front panel of the TV unit for tuning.
1. Turn on your digital set-top box. Wait one minute for initialisation to complete before
you press the
MOSAIC button on the remote control of the digital set-top box.
2. Press the AUTO SEARCH button on the front panel of the TV or select
[MENU>TUNE>AUTO] from the TV remote control.
3. The TV unit will automatically search and lock all available TV channels assigning each
channels with a CHANNEL NUMBER (#).
4. Pay attention to the CHANNEL NUMBER (#) that is assigned to the StarHub TV
channel.
5. Once the Auto Search is complete, press the CHANNEL NUMBER (#) that has been
assigned to receive the StarHub TV channel.
Tuning Procedures-Auto
1. Turn on your digital set-top box. Wait one minute for initialisation to complete before
you press the MOSAIC button on the remote control of the digital set-top box.
2. Select an unused CHANNEL on the TV unit.
3. Press the TUNING button on the TV remote control or at the front panel of the TV unit,
commonly labeled as [PRESET], [INSTALL], [SET], [P/C] or [MENU>TUNE>MANUAL]. If
the TV unit does not have any of these buttons, please refer to the TV manual.
4. Start tuning by pressing or selecting the /- button or the CHANNEL
UP/DOWN button on the TV remote control until the StarHub TV channel appears on
the screen.
5. Next, press the STORE or MEM button on the TV remote control to store the tuning.
6. Press the MENU or PRESET button to end or exit the tuning procedure.
Tuning Procedures-Manual
Technical Information
Tuning Procedures