SOHORAID SR4 User Manual
Step 4 Mount your hard drives onto the removable drive tray and secure it with the screws included in the
accessory kit to avoid any damage to the hard drive due to accidental movements.
Step 5 When the hard drive installation has been completed, insert the hard drive tray into the system
horizontally and secure the latch into place.
Step 6 Connect the AC power cable to the SR4-SB3, and then plug the AC power to the wall socket.
Boot-up the unit.
Step 7 Set the storage mode using the LCD and buttons on the front (please refer to section 5 for front
panel and LCD information).
Step 8 Connect the cable to the PC and the SR4-SB3 port.
Step 9 After boot-up, your operating system will automatically detect the storage capacity of your hard
drives. Please follow the operating system instructions to configure and format your drives. The
formatted drives can be configured for the RAID setup.
6
5. Description of Front Panel Operation and LCD Information
Level 0
Level 1
Level 2
Level 3
Level 4
EXTERNAL 4
BAY
HARDWARE
RAID
Quick Setup
Create One RAID RAID 0 / RAID 5
Select Disk
Delete All RAID
Disk Manager
Identify Disk
Disk 1
Check Disk LED
Disk 2
Check Disk LED
Disk 3
Check Disk LED
Disk 4
Check Disk LED
Show Disk Info
< Disk Info >
RAID
Manager
Identify RAID
Select RAID
Create RAID
RAID 0 / RAID 5
Select Disk
Delete RAID
Select RAID
RAID Info
Change RAID
Pwd
< Password >
for RAID setup
Rebuilding Priority Highest/High/Medium/Low/Lowest
Standby Timer
< 99999min >
System
Manager
System Info
Firmware Version
Change Password < Password >
for System Info
Logout From
Menu
< Y or N >
Alarm Control
Mute the Buzzer
Hardware Monitor
Voltage Monitor
< 3.3V / 5V / 12V >
Temp. Monitor
< Temp. >
FAN Monitor
<Fan Speed/Fan
Level>
