![Starcraft Bay series Скачать руководство пользователя страница 34](http://html1.mh-extra.com/html/starcraft/bay-series/bay-series_owners-manual_1363337034.webp)
www.thebestboatbrands.com
34
you to keep your catch alive. Some boats are equipped with oxygen enhance-
ment equipment. Contact you dealer for additional information..
The pump works best when at rest or at idle speeds. Faster speeds makes it
difficult for the pump to draw water.
The stand pipe/overflow tube helps to maintain the necessary level of water
within the tank. The stand pipe allows excess water to drain out below the
deck of the boat back into the lake, river, etc. Your local Starcraft Marine/
SmokerCraft Inc. dealer can further assist you on specific livewell operation.
12 Volt Power Point:
Available on most Starcraft/SmokerCraft models, it can be used to run acces-
sories such as cell phones. Check your accessory owner’s manual before plug-
ging into the power point.
Stereo:
While the Stereo Control in your boat is designed to operate in a marine envi-
ronment, care should be taken to protect your stereo from the elements when
possible.
An owner’s manual for your specific stereo can be found in your owner’s
packet. Please read your stereo manual before operating your stereo. Contact
your dealer before changing or modifying your stereo. It is important to note
that radio reception can be affected by engine, transducer or electric motor
transmissions.
Tables:
Depending on your Starcraft/SmokerCraft model, your boat may come stan-
dard with a table. Contact you dealer before adding a table to your boat. Al-
ways use the release button at the bottom of the pole to remove the pole from
the base. Make sure that the table is securely in the base before using. The ta-
ble should be stored during transportation to prevent damage to the table or
from blowing off the boat.
Cupholders:
Most Starcraft/SmokerCraft models have cupholders located throughout the
boat. The number as well as the location will vary from model to model. Al-
ways make sure that excess water is removed when storing the boat to prevent
freezing and ultimately cracking the holders. Cupholders at the driver’s helm
should never be removed. Doing could will disrupt the drainage system that
keeps water from contacting the electrical wiring located in the console. Some
models have portable cupholders that can be moved to other locations on the
boat. These cupholders slide between the seat back and bottom cushion. Be
sure that cupholders are securely in place before getting under way or trans-
porting.