Starbucks Barista Aroma Solo
TM
Thermal Coffee Maker
3-5
4
Plug in coffee maker.
Result: When you plug in the machine, the following lights will illuminate
for two seconds:
•
Blue backlight
•
On/Off light (12)
•
Auto-on light (14)
You will also hear a tone.
5
Press the On/Off button (11).
Result: The blue light beside the On/Off button will illuminate and the
solution will begin to brew into the thermal tumbler.
6
After approximately half of the solution has run through, press the On/
Off button (11).
Result: Machine turns off.
7
Leave the remaining solution to soak in the water reservoir for 15 to 30
minutes.
8
Press the On/Off button (11) again and allow the remaining solution to
run through the machine.
9
Discard the solution and allow the machine to cool for at least 15
minutes.
10
Hand wash and rinse the water reservoir (2) and thermal tumbler (6)
with warm water.
Caution: Do not put in dishwasher.
11
Refill the water reservoir with fresh cold water. Repeat steps 2 through
7.
Caution:
Do not use any cleaners during this brewing cycle.
Step
Action
Section3AromaSolo.fm Page 5 Thursday, January 27, 2005 3:08 PM
Содержание BARISTA AROMA SOLO
