9
Chapter 3
Your Gateway At A Glance
The Lynx L-320 has different ports and LEDs. Let’s take a look at the
different options.
3.1
Ports and Buttons
Reset and Restore to Factory Defaults: The restore to factory defaults
feature will set the Lynx L-320 to its factory default configuration by
resetting the Lynx L-320. You may need to place the Lynx L-320 into its
factory defaults if the configuration is changed; you loose the ability to
interface to the Lynx L-320 via the web interface, or following a software
upgrade. To reset the Lynx L-320, simply press the reset button for about ~
10 seconds. The Lynx L-320 will be reset to its factory defaults and after
about 30 ~ 40 seconds the Lynx L-320 will become operational again.
LAN (local area network) ETHERNET port: There are 4 Ethernet ports
available for connection to four Ethernet network devices. If 4 ports are not
enough, you can connect to one of them a hub or a switch.
Power is where you connect the power. Make sure to observe the proper
power requirements. The required power is 9 volts.
DSL Port: This is the WAN interface that connects directly to your phone
line.
