33
Figure 1-26: MAC Filtering (Bridge Filters)
5.5.14
Access Control
Access control allows you to open the access from the Internet LAN to the
following management ports of the DSL600EU:
•
Telnet
•
Web
•
FTP
•
TFTP
•
Secure Shell (SSH)
•
SNMP
Fig 1-27 shows the default Access Control screen. The Access Control is
disabled by default, remote management from the WAN side IP addresses is
denied, most services from the LAN side IP addresses is enabled. Remember
to:
1.
Check Enable Access Control to enable this feature. (This will enable
the IP Access List field)
2.
You can select an IP from the IP Access List, or enter a new IP and
check ADD
3.
Change the LAN and / or WAN configurations of the IP address
4.
Click Apply
