13
LIFT PULL
INSTALLATION
Note:
take special care when unwrapping unit,
DO NOT
use knifes to cut open packaging damage may occur.
STEPS:
1.
Take main body off the pallet and place it on the floor.
2.
Attach the platform to the main body.
Use (2) M12 washers, (2) M12 x 30 button head screws, and (2) M12 locking nuts to mount platform to
the main body, tighten fasteners to (84 NM / 62 ft-lb) torque.
3.
Mount the upper arms to the main body
(Note: this requires (2) people
Use (6) M12 x 30 button head screws, (6) M12 locking nuts, and (6) M12 washers and tighten fasteners to
(10 nm / 7.4 ft-lb) torque.
. Cables are attached to this assembly, take special care not to pinch,
twist or damage cables) .
4.
Attach accessories to the unit.
5.
Place urethane boots under feet.
