Star Trac E-UB, Руководство по установке

Страница: 36 / 58

49
620-7922 Rev B
Step 22.
Take the front display plastics with the new cen-
ter console to the base unit. Hold the front dis-
play plastics at the top with one hand while con-
necting the cables/harnesses with the other.
Step 23.
Identify the four cables coming out of the neck
and mounting bracket:
1. Heart rate cable.
2. Main I/O cable.
3. Coax cable.
4. DC power cable.
Note: The coax and DC power cables are part of
the PVS and embedded kits and should be tucked
down the neck for possible future use.
Step 24.
Plug-in the 12-pin main I/O cable from the neck
into the new 12 pin adaptor.
1
2
3
4
Step 21.
Install the new bottom plastic cover onto display,
use the screws saved from the earlier step to
secure the display bottom. Tighten the screws
so they are snug, then plug in the CSAFE power
cable to the back of the display.
Note: Take special care to not pinch any of the ca-
bles between the plastics.