Page 5
12.
Use a #2 phillips screwdriver to secure the back
console shroud (020-7460-XX) to the console
weldment using ten (10) pieces each of the #8-18
x 3/4” screw (110-3402) and M4 washer (120-
3307).
13.
Refer to the documentation contained inside the
console box in order to connect the console to
the unit.
NOTE:
Depending on which console was purchased,
the install instructions could diff er.
14.
Use a #2 phillips screwdriver to secure the
console front (701-0210-XX) to the back shroud
using ten (10) pieces of the #8-18 x 3/4” screw.
15.
Plug the power cable into the power inlet on
the bottom of the machine, then route the cable
through the power cord retention brackets and
tighten with a #2 phillips screwdriver to secure
the cord.
