6. Install Rear Console Top and Bottom Shrouds
Secure rear console bottom shroud to console in the correct position with six M4 x 0.7 x 19mm, Pan Head Screws,
then secure console top rear shroud to console in correct position with eight M4 x 0.7 x 19mm, Pan Head Screws,
tighten all screws securely.
7. Install Side Treads on Base Assembly
Remove the paper layer of the adhesive tape located on the back of side tread plates, now install the tread into
position on the base assembly with one #10-16 x 1/2" tapping pan head screw.
Install the remaining tread in similar manner.
M4x19mm, Pan
Head Screw
#10-16 x 1/2" Pan Head Screws
