Star Micronics LS-5 SERIES, Техническое руководство

Страница: 66 / 204

– 62 –
MAINTENANCE GUIDE
4-2. P/J List
Coordinates of connectors corresponding to “4-1. P/J Layout Drawing” are shown below.
Note 1: While P/J2 is in LVPS assy, silk print on LVPS assy board is indicated as “P12.”
Note 2: P/J115, P/J201 and P/J202 are in both tray 1 (upper feed unit) and tray 2 (lower feeder unit: optional).
Note 3: Descriptions of P/J Layout Drawings concerning the main logic board, transit board, RAM board and ROM
board MS are omitted.
P/J Remark
•
P/J in LVPS assy
2 13
•
For use in thermistor of temp.
sensor assy
11 G5
•
P/J on MCU PCB
12 E6
•
P/J on MCU PCB
13 E6
•
P/J on MCU PCB
14 E5
•
P/J on MCU PCB
15 F5
•
P/J on MCU PCB
16 F5
•
P/J on MCU PCB
17 F5
•
P/J on MCU PCB
18 E5
•
P/J on MCU PCB
19 G5
•
P/J on MCU PCB
21 F5
•
P/J on MCU PCB
31 G6
•
Connection between MCU
PCB and main logic board
32 E6
•
P(plug) on MCU PCB
•
For test print use
•
P/J on main logic board
51 I4
•
For use in power supply for
main logic board
101 I3
•
Connection between LVPS
assy and fuser assy
111 F5
•
P/J on HVPS
112 F14
•
P/J of the rear side of ROS
assy
P/J Remark
113 H12
•
P/J of the left side of ROS
assy
114 F13
•
P/J of ROS assy bottom
E27
•
Connection between main-
frame and feeder assy
115
E28
•
Connection between feeder
assy and optional feeder unit
116 E28
•
P/J on feeder PCB
118 H3
•
P/J on CRU sensor PCB
119 G3
•
P/J of exit sensor
120 F20
•
P/J of regi. sensor
121 G20
•
P/J of MBF sensor
201
F28
•
P/J on feeder PCB
F29
•
P/J on feeder PCB AUX
202
F28
•
P/J on feeder PCB
F29
•
P/J on feeder PCB AUX
301 E19
•
Connection between MCU
PCB and pick up solenoid
CR G4
•
P/J on feeder HVPS
DB E4
•
P/J on feeder HVPS
TR F4
•
P/J on feeder HVPS
RTN E5
•
A pair of P/J on HVPS
TR-T H19
•
P/J on the back of trans. chute
assy
Coordi-
nates
Coordi-
nates