Star Headlight & Lantern ULB34, Быстрый старт, Страница: 3 / 8

-2-
It is the sole responsibility of the owner to ensure the lightbar is
mounted securely. Check your light every time you enter the
vehicle to ensure that it is mounted securely. The manufacturer
assumes no responsibility for the secure mounting of this light.
Please Note: These instructions are provided as a general guideline only. Some
vehicles may require special mounting, wiring, and/or weather-sealing. This is the
sole responsibility of the installer.
Star Headlight & Lantern Co., Inc. assumes no
responsibility for the integrity of the installation for this or any of its products.
(Mounting CONT’D)
3. Hold the light up to the location where it is to be mounted. We recommend aligning
the corner of the bend in the bracket with the rear edge of the moulding above the rear
window.
4. Using the brackets as a template, mark your mounting holes.
5. Carefully drill appropriately sized pilot holes in the marked locations, based upon the
size of your mounting hardware (user supplied).
6. Install the light making any necessary adjustments to the brackets prior to tightening all
of your screws. Ensure that the unit is level to the ground so that the light shines
unobstructed through the rear window. Check the angle of the light by standing 20
feet behind the vehicle. Adjust the light up, down, right, or left to obtain the brightest
output directly to the rear of the vehicle.
7. Carefully tighten all the screws once the light has been adjusted satisfactorily.
2. Attach the mounting brackets to the back
of the light. Leave the screws loose to
allow for bracket adjustment.