-3-
The
Split Phantom
™
is designed to be mounted on the inside
of your vehicle. It is not intended for exterior applications and is
not warranted against water damage.
It is the sole responsibility of the owner to ensure the warning light is
secure. Check your light every time you enter the vehicle to ensure that
it is mounted securely. The manufacturer assumes no responsibility for
the secure mounting of this light.
The following mounting instructions describe the standard, most
common way to mount this light. This method may or may not apply to
your vehicle. Because vehicles can vary widely in their design, it may be
necessary to configure the brackets differently than described. Some
applications may require you to design your own custom brackets. The
installer assumes all responsibility for the integrity of the installation.
It is
the sole responsibility of the owner to ensure the light is secure.
Mounting Instructions
Before installing any of the
brackets, slide the enclosed
rubber channel over the
front edge of the baffle
.
The ULB21 is designed to be mounted in the front windshield of a vehicle using
both of the pre-existing visor clips. An alternate method is also shown using the
Universal Brackets.
