Star Headlight & Lantern LCS653, Инструкция по установке и эксплуатации

Страница: 6 / 20

-4-
MOUNTING
SAFETY PRECAUTIONS
For the safety of the installer, vehicle operator, passengers, and the community
please observe the following safety precautions.
Failure to follow all safety
precautions and instructions may result in property damage, injury or
death.
AMPLIFIER
The SS651-AMP (used in the SS651, SS651MT,
LCS653, and LCS653-1
) should be
mounted in a location such as the firewall, under the seat, in the trunk, or in the
saddlebag. DO NOT mount the amplifier in the engine compartment or in an area
that would be allowed direct exposure to weather elements. Choose a mounting
location away from any air bag deployment areas. Assure adequate ventilation to
prevent overheating.
The amplifier unit is provided with four mounting flanges with 1/4" holes. Using
the amplifier unit itself as a template, mark the location of the four mounting holes
to be drilled. Be sure to check for obstructions behind the mounting hole
locations. Drill the four mounting holes and secure the amplifier using appropriate
hardware (not supplied).
MOTORCYCLE/MARINE INSTALLATIONS
(SS651MT ONLY!)
This SS651-AMP can be used on a motorcycle or for marine applications by
sealing the case with silicone sealant along the mating edges and around the
wire connector. In order to reduce water entry, the amplifier should be oriented
with the wire connector faced down. Only the waterproof switch assembly
found in the SS651MT (SS651MT -CH) should be used for wet location
operation.
DO NOT mount in air bag deployment area.
Devices should be mounted only in locations listed in
SAE standard J1849.
Controls should be placed within convenient reach of
the driver.
Assure clearances before drilling in vehicle.
Sound levels produced by attached speakers can
cause permanent hearing loss.
Never operate this unit without adequate hearing
protection for you and others in the area.
(OSHA 1910.95)