Stanley WET / DRY VACUUM, Руководство пользователя

Страница: 2 / 41

EXTENSION CORDS
When using the appliance at a distance where an extension cord becomes necessary, a -conductor rounding cord
of adequate size must be used for safety, and to prevent loss of power and overheating. Use the table below to
determine A.W.G. wire size required. To determine ampere rating of your vacuum, refer to nameplate located on
rear of motor cover.
Before using appliance, inspect power cord for loose or exposed wires and damaged insulation. Make any needed
repairs or replacements before using your appliance. Use only three-wire outdoor extension cords which have
three-prong grounding-type plugs and three-pole receptacles which accept the extension cord's plug. When
vacuuming liquids, be sure the extension cord connection does not come in contact with the liquid.
NOTE: STATIC SHOCKS ARE COMMON IN DRY AREAS OR WHEN THE RELATIVE HUMIDITY OF THE AlR IS
LOW. THIS IS ONLYTEMPORARY AND DOES NOT AFFECTTHE USE OF THE APPLIANCE.TO REDUCE THE
FREQUENCY OF STATIC SHOCKS IN YOUR HOME, THE BEST REMEDY IS TO ADD MOISTURE TO THE AlR
WITH ACONSOLE OR INSTALLED HUMIDIFIER.
Volts Total length of cord in feet
120V 25 50 100 150
Ampere Rating
More - Not
More
Than
AWG
0-6
6-10
10-12
12-16
18
18
16
14 16
16
16
12 16
14
14 14
12
12
Not recommended