Stanley STGS9115, Оригинальное руководство пользователя

Страница: 11 / 48

11
(
Original Instructions)
ENGLISH
service centers or other qualified organizations,
always using identical replacement parts. Unit
contains no user service able parts inside.
ACCESSORIES
WARNING: Since accessories, other than those
offered by STANLEY, have not been tested with
this product, use of such accessories with this
tool could be hazardous. To reduce the risk of injury, only
STANLEY, recommended accessories should be used with
this product.
The performance of any power tool is dependent upon the
accessory used. STANLEY accessories are engineered to
high quality standards and are designed to enhance the
performance of power tool. By using STANLEY accessories
will ensure that you get the very best from your STANLEY
tool. STANLEY offers a large selection of accessories
available at our local dealer or authorized service center at
extra cost.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your STANLEY product
needs replacement, or if it is of no further use to you, do
not dispose of it with household waste. Make this product
available for separate collection.
STANLEY provides a facility for the collection
and recycling of STANLEY products once they
have reached the end of their working life. To
take advantage of this service please return your
product to any authorised repair agent who will
collect them on our behalf.
You can check the location of your nearest authorised
repair agent by contacting your local STANLEY office at
the address indicated in this manual. Alternatively, a list
of authorised STANLEY repair agents and full details of
our after-sales service and contacts are available on the
Internet at: www.2helpU.com.
NOTES
STANLEY’s policy is one of continuous improvement to
our products and as such, we reserve the right to change
product specifications without prior notice. Standard
equipment and accessories may vary by country. Product
specifications may differ by country. Complete product
range may not be available in all countries. Contact your
local STANLEY dealers for range availability
SERVICE INFORMATION
STANLEY offers a full network of company-owned and
authorized service locations. All STANLEY Service Centers
are staffed with trained personnel to provide customers
with efficient and reliable power tool service. For more
information about our authorized service centers and
if you need technical advice, repair, or genuine factory
replacement parts, contact the STANLEY location nearest
you.
- Small Angle Grinder
STANLEY declares that these products described
under “technical data” are in compliance with: 2006/42/
EC, EN 60745-1:2009 + A11:2010 and EN 60745-2-
3:2011+A11:2014 +A12:2014+ A13:2015.
Level of sound
pressure according to
EN 60745:
STGS9115 STGS9125
Sound pressure
(L
WA
)
dB(A)
101 101
Sound pressure
uncertainty (K
pA
)
dB(A)
3 3
Sound power
(L
pA
)
dB(A)
90 90
Sound power
uncertainty (K
WA
)
dB(A)
3 3
Vibration emission
value ah:
STGS9115 STGS9125
(a
h, AG
) = m/s
2
5.9 6.6
(a
h,DS
) = m/s
2
3.1 5.8
Uncertainty (K) = m/s
2
1.5 1.5
VIBRATION AND NOISE
The declared vibration and noise emission values stated in
the technical data and the declaration of conformity have
been measured in accordance with a standard test method
provided by EN 60745 and may be used for comparing one
tool with another. The declared vibration and noise emission
value may also be used in a preliminary assessment of
exposure.
WARNING! The vibration and noise emission
value during actual use of the power tool can
differ from the declared value depending on the
ways in which the tool is used. The vibration and
noise level may increase above the level stated.
When assessing vibration and noise exposure to determine
safety measures required by 2002/44/EC to protect persons
regularly using power tools in employment, an estimation
of vibration and noise exposure should consider, the actual
conditions of use and the way the tool is used, including
taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running
idle in addition to the trigger time.
EC declaration of conformity
MACHINERY DIRECTIVE
STGS9115/STGS9125