background image

4

ENGLISH

g) 

If devices are provided for the connection 

of dust extraction and collection facilities, 

ensure these are connected and properly 

used

. Use of dust collection can reduce 

dust-related hazards.

4) PowEr TooL uSE and carE

a) 

Do not force the power tool. Use the 

correct power tool for your application.

 

The correct power tool will do the job 

better and safer at the rate for which it was 

designed.

b) 

Do not use the power tool if the switch 

does not turn it on and off. 

Any power tool 

that cannot be controlled with the switch is 

dangerous and must be repaired.

c) 

Disconnect the plug from the power 

source and/or the battery pack from 

the power tool before making any 

adjustments, changing accessories, or 

storing power tools. 

Such preventive safety 

measures reduce the risk of starting the 

power tool accidentally.

d) 

Store idle power tools out of the reach 

of children and do not allow persons 

unfamiliar with the power tool or these 

instructions to operate the power tool.

 

Power tools are dangerous in the hands of 

untrained users.

e) 

Maintain power tools. Check for 

misalignment or binding of moving parts, 

breakage of parts and any other condition 

that may affect the power tool’s operation. 

If damaged, have the power tool repaired 

before use.

 Many accidents are caused by 

poorly maintained power tools.

f) 

Keep cutting tools sharp and clean. 

Properly maintained cutting tools with sharp 

cutting edges are less likely to bind and are 

easier to control.

g) 

Use the power tool, accessories and 

tool bits etc. in accordance with these 

instructions, taking into account the 

working conditions and the work to be 

performed. 

Use of the power tool for 

operations different from those intended 

could result in a hazardous situation.

5) SErvicE

a) 

Have your power tool serviced by a 

qualified repair person using only identical 

replacement parts.

 This will ensure that the 

safety of the power tool is maintained.

SAFETY WARNINGS COMMON FOR 

GRINDING OPERATIONS:

a) 

This power tool is intended to function 

as a grinder tool and Cutting-off tool. 

Read all safety warnings, instructions, 

illustrations and specifications provided 

with this power tool. 

Failure to follow 

all instructions listed below may result in 

electric shock, fire and/or serious injury.

b) 

Do not recommend use this power tool 

operations as sander, wire brush and 

so on.

 Used this power tool do besides 

appointed function will cause hazards and 

personal injuries.

c) 

Do not use accessories which are not 

specifically designed and recommended 

by the tool manufacturer.

 Just because the 

accessory can be attached to your power 

tool, it does not assure safe operation.

d) 

The rated speed of the accessory must 

be at least equal to the maximum speed 

marked on the power tool. 

Accessories 

running faster than their rated speed can 

break and fly apart.

e) 

The outside diameter and the thickness 

of your accessory must be within the 

capacity rating of your power tool. 

Incorrectly sized accessories cannot be 

adequately guarded or controlled.

f) 

The arbour size of wheels, flanges, 

backing pads or any other accessory 

must properly fit the spindle of the power 

tool. 

Accessories with arbour holes that do 

not match the mounting hardware of the 

power tool will run out of balance, vibrate 

excessively and may cause loss of control.

g) 

Do not use a damaged accessory. 

Before each use inspect the accessory 

such as abrasive wheels for chips and 

cracks, backing pad for cracks, tear or 

excess wear, wire brush for loose or 

cracked wires. If power tool or accessory 

is dropped, inspect for damage or 

install an undamaged accessory. After 

inspecting and installing an accessory, 

position yourself and bystanders away 

from the plane of the rotating accessory 

and run the power tool at maximum 

no-load speed for one minute.

 Damaged 

accessories will normally break apart during 

this test time.

h) 

Wear personal protective equipment. 

Depending on application, use face 

shield, safety goggles or safety glasses. 

As appropriate, wear dust mask, hearing 

protectors, gloves and workshop apron 

Содержание STEL861













Отзывы: