Stanley STEL861, Руководство пользователя

Страница: 7 / 12

7
ENGLISH
6) Toggle switch
7) Grinding Wheel
8) Spindle
9) Spanner
10) Front handle
11) Primary handle
OPERATING INSTRUCTIONS
1) POWER SUPPLY
The power tool supply must match the
nameplate data.
2)
INSTALLING WHEEL
(
Fig A
)
@
WARNING!
Only use grinding wheels with
maximum safe operating speed rated at or
above 40m/s. Ensure the grinding wheel is
correctly mounted and tightened, run the
tool at no-load speed for 30 secondes in
safe position before using. Stop immediately
if there is considerable vibration or other
defects are detected. Never use damaged
grinding wheels or rimous ones.
a) Mount the spanner (9) to the spindle (8) and
loosen the clamping nut (2) with another
spanner.
b) Insert the grinding wheel (7) shaft into the
collet chuck (1) as far as it can go.
c) Tighten the collet chuck (1) securely by
spanners.
3)
SWITCHING ON AND OFF
@
WARNING!
Make sure you can control the
switch freely and keep it off before plugging
in.
a) ON: Shift switch (6) to " 1 ". ( Fig D )
b) OFF: Shift switch (6) to " 0 ". ( Fig D )
c) Let the wheel reach full speed before
grinding.
d) Once the safety brush worn, grinder turns
off automatically to avoid motor damage.
Motor was damaged.
e) After inspecting and installing an accessory,
run the power tool at maximum no-load
speed for five minutes before any work.
STANDARD ATTACHMENTS
1) Collet
2) Two Spanners (17mm)
Be sure to check the attachments as it is
subject to change by areas and models.
APPLICATION
@
WARNING! To reduce the risk of injury,
electric shock and damage to the tool,
before any work check the utility lines
electricity, gas or water supply line are
hidden in the work area.
@
WARNING! Firmly grasp primary hold part
of tool and side handle before starting.
Grinding Application
1) Optimum grinding results are achieved
when the grinding tool is moved uniformly
back and forth with light pressure.
2) Pressure that is too strong reduces the
performance capability of the tool and
cause the grinding to exhaust more quickly.
c) Be sure that the distance between the top
of collet chuck and bottom of the grinding
wheel is less than 8mm and between the
top of collet chuck and top of grinding
wheel is less than 45mm to prevent
vibration of the tool and unexpected
accidents.( Fig C )
@
WARNING!
Sparks generated when
grinding metal.Take care that no
combustible material presented on the area
of flying sparks.
MAINTENANCE
Your tool has been designed to operate over
a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper tool care and regular
cleaning.
@
WARNING!
Before performing any
maintenance, switch off and unplug the
tool.
• Regularly clean the ventilation slots in your
tool using a soft brush or dry cloth.
• Regularly clean the motor housing using
a damp cloth. Do not use any abrasive or
solvent-based cleaner.
@
IMPORTANT! To assure product Safety
and reliability, repairs, maintenance and
adjustment (other than those listed in
this manual) should be performed by
authorized service centers or other qualified
service personnel, always using identical
replacement parts.
LUBRICATION
Stanley tools are properly lubricated and are
ready for use.
PROTECTING THE ENVIRONMENT
Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your Stanley
product needs replacement, or if it is of
no further use to you, do not dispose of it