22
E N G L I S H
39. Troubleshooting guide
y
d
e
m
e
R
e
s
u
a
C
m
o
t
p
m
y
S
Tool stops before rivet is fully set
Setting load of rivet is beyond tool
capacity.
Reset tool to home, remove rivet &
use appropriate tool to set rivet.
Improper nosepiece selection.
Reset tool to home, remove rivet &
fit proper nose piece.
Battery pack has reached operating
temperature limit through
continuous use or defect.
Remove battery & allow to cool.
Mount battery and reset tool to
home.
Tool does not return to initial
position when switch is released.
Electrical malfunction.
Remove battery, wait 5 seconds and
reinsert. Reset tool to home.
Tool does not operate when switch
is pressed.
Battery is not fully seated
Remove battery and re-insert. Reset
tool to home.
Battery is not fully charged
Charge battery
Battery pack has reached operating
temperature limit through
continuous use or defect.
Remove battery & allow to cool.
Mount battery and reset tool to
home.
Battery is defective
Replace battery
*Reset tool to home: quickly pull & release the switch
