9
E N G L I S H
contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery
may cause irritation or burns.
4.6 SERVICE
a)
repair person using only identical
replacement parts.
This will ensure that the
safety of the power tool is maintained.
c Safety Rules
for Blind rivet tools
t
Hold power tool by insulated gripping surfaces
when performing an operation where the
fastener may contact hidden wiring.
Fasteners
parts of the power tool “live” and could give the
operator an electric shock.
s
k
s
i
R
l
a
u
d
i
s
e
R
.
6
In spite of the application of the relevant safety
regulations and the implementation of safety devices,
certain residual risks cannot be avoided. These are:
-
Impairment of hearing.
-
Risk of personal injury due flying particles.
-
Risk of burns due to accessories becoming hot
during operation.
-
Risk of personal injury due to prolonged use.
l
o
o
T
n
o
s
g
n
i
k
r
a
M
.
7
The following pictograms are shown on the tool:
Read instruction manual before use.
Discard the tools with due care for the
environment.
DATE CODE POSITION
The Battery Date Code, which also includes the year of
manufacture, is printed into the housing surface that
forms the mounting joint between tool and battery.
r
o
f
s
n
o
i
t
c
u
r
t
s
n
I
y
t
e
f
a
S
t
n
a
t
r
o
p
m
I
.
8
All Battery Chargers
SAVE THESE INSTRUCTIONS:
This manual contains
important safety and operating instructions for the
EBC105 battery charger.
t
Before using the charger, read all instructions and
cautionary markings on charger, battery pack and
product using the battery pack.
WARNING:
Shock hazard. Do not allow any
liquid to get inside charger. Electric shock
may result.
CAUTION:
Burn hazard. To reduce the risk
of injury, charge only POP® rechargeable
battery packs. Other types of batteries may
overheat and burst resulting in personal
injury and property damage.
CAUTION:
Children should be supervised
to ensure that they do not play with the
appliance.
NOTICE:
Under certain conditions, with the
charger plugged in to the power supply,
the exposed charging contacts inside the
charger can be shorted by foreign material.
such as, but not limited to, steel wool,
aluminium foil or any build-up of metallic
particles should be kept away from charger
cavities. Always unplug the charger from
the power supply when there is no battery
pack in the cavity. Unplug charger before
attempting to clean.
t
DO NOT attempt to charge the battery pack with
any chargers other than the ones in this manual.
The charger and battery pack are specifically
designed to work together.
t
These chargers are not intended for any
uses other than charging POP® rechargeable
batteries.
Any other uses may result in risk of fire,
electric shock or electrocution.
t
Do not expose charger to rain or snow. Pull
by plug rather than cord when disconnecting
charger.
This will reduce risk of damage to electric
plug and cord.
t
Make sure that cord is located so that it will
not be stepped on, tripped over or otherwise
subjected to damage or stress. Do not use an
extension cord unless it is absolutely necessary.
Use of improper extension cord could result in risk of
fire, electric shock or electrocution.
t
outdoors, always
suitable for outdoor use.
outdoor use reduces the risk of electric shock.
t
Do not block the ventilation slots on the charger.
The ventilation slots are located on the top and sides
from any heat source.
t
Do not operate charger with damaged cord or
plug
— have them replaced immediately.
t
blow, been dropped or otherwise damaged in
any way.
Take it to an authorised service centre.
