Stanley MSD 1000, Руководство по безопасности, эксплуатации и техническому обслуживанию

Страница: 9 / 117

Introduction to Safety Section 1 Page 3
MSD SABER SERIES SHEARS
If the attachment is not functioning properly,
you MUST shut the machine down and follow
proper lock-out, tag-out and repair procedures.
NEVER operate equipment without the original
equipment safety guards in place. If the cab
glass is missing or damaged, check with your
dealer or manufacturer for proper replacement.
Ensure that the cab is equipped with the proper
safety guards for LaBounty applications. In
addition, it is required that the cab be equipped
with an approved Falling Object Protection
Structure (FOPS) when processing materials.
The FOPS must meet the requirements of SAE
standard J1356. A transparent shatter-resistant
shield covering the front of the cab is also
required. Contact your base machine equipment
dealer or manufacturer for more information on
the availability of FOPS. Lack of proper FOPS
may result in injury or death.
DO NOT process or handle material with the
attachment over the operator’s cab.
DO NOT attempt to shear brittle materials such
as axles and railroad rail. Brittle material breaks
or shatters instead of shearing. The material
being processed could become a projectile
and cause injury or death. DO NOT process
any material in any position that may propel it
toward operator, other workers, buildings or
equipment.
DO NOT close the attachment on a structure and
reverse the excavator in an attempt to pull down
material.
Clear all persons and equipment from the area of
operation and machine movement. NEVER move
loads over people or equipment. When viewing
the operation of the attachment, maintain a safe
distance of at least 75 feet (22.9 meters).
NEVER approach power lines with any part of
the machine. Keep clear at a minimum of 15 feet
(5 meters).
Avoid tipping. The attachment will alter the
lift capacities of the base machine. DO NOT
overload the excavator or serious injury could
result. Lift capacities will vary if the base
machine is not on level ground. Carry loads in
recommended positions for maximum stability.
Use the recommended excavator counterweight.
Use short slings and lift the load only as high as
necessary.
DO NOT allow riders on the machine.
NEVER remove any pins unless the attachment
is on the ground and blocked up or serious
injury or death could result. Metal chips
or debris may fl y when a connecting pin is
struck. Use a brass drift when striking pins and
always wear protective clothing and proper eye
protection. Pins may fl y when struck with force
to drive them in or out. Keep people clear when
removing or installing pins.
SAFETY SUMMARY