GW1200 Gateway Installation & Configuration Guide
20
Mounting on a Narrow-Grid T-Bar
For this mounting option the following parts from the Standard Exciter Mounting kit
(EXAC-STD-1000) are required:
Part Letter
Part Name
Quantity
Image
A
Mounting Adaptor
1
C
Narrow Grid Clip- 9/16”
Clip with #8 Stud
2
J
#8-32 Hex Nyloc Nut
2
1.
Cut the Mounting Adaptor (A) so that only Section # 1 remains.
Use Mount Adaptor part marked with “<= 1 =>”
2.
Assemble the Grid Clips (C) on the Adaptor (A). Lock each Clip (C) with Hex Nut (J).
The
Nuts should be loose at this stage to allow easy insertion onto the grid.
