• Keeping your valuable equipment safe and accounted for is crucial.
• the neW locK is the best Way to control your Job site.
• the locK is easily programmed to open up during set hours and only to the
authorized WorKers With user tags.
• the log registers the entries.
• softWare and mobile application enabels managing WorKers details and
controlling the locK*.
THAnK yOu FOR CHOOSInG THE STAnlEy GuARD ACCESS COnTROl SySTEm.
InSTAllInG THE
BATTERy
SET uP AnD InSTAllATIOn
2
Insert the mechanical key and
rotate it clockwise till lock is opened.
open the screw beneath the latch.
1
4
5
6
remove battery cover.
Place battery cover back on and
close the screw tightly in clockwise
direction.
the lock is ready for operation.
* software not included/ mobile application included
with
the ACS BT
3
02
insert cr123a batteries. make sure
that battery (-) is facing the springs.
1.
please copy and keep the code marked on the key.
2.
In case of key is lost, contact the customer service to order a new one. you will need to advise the code.
3.
There is a spare key so you can also duplicate the key.
4.
In case there is no key and also no code is at hand - the cylinder will need to be replaced.
please contact customer service to send your lock to be fixed or arrive there to do so.
