20- ENG
4. Attach bottle to water inlet of pump.
5. Squeeze bottle to inject contents into pump.
6. With ignition switch off, simultaneously pull starter rope and squeeze bottle. Repeat
until protector fluid exits pump outlet.
NOTE:
This step may require two people.
PRESSURE WASHER
1. Drain all water from high pressure hose and wrap it onto hose wrap.
2. Drain all water from the spray gun and wand by holding spray gun in a vertical
position with nozzle end pointing down and squeezing trigger. Store in gun holder.
3. Wrap up and secure detergent siphon hose so it is protected from damage.
ACCESSORIES
DANGER: Risk of fluid injection. When using replacement spray
wands or guns with this pressure washer, DO NOT use a spray wand
and/or spray gun/wand combination that is shorter in length than
what was provided with this pressure washer as measured from the
nozzle end of the wand to the gun trigger.
NOTICE:
The use of any other accessory not recommended for use with this tool could
be hazardous. Use only accessories rated equal to or greater than the rating of the
pressure washer.
SPECIFICATIONS
MODEL
SXPW3425
PSI Max*
3400 psi
GPM Max*
2.5 gpm
High Pressure Hose
35 ft. (10.7 m)
Presure of Inlet Water
20–100 psi
Inlet Water
cold tap
Soap Consumption Rate
10% max
* Rated Pressure and Rated Water Flow is within manufacturing tolerance of
(+/- 10%).
In a continued commitment to improve quality, the manufacturer reserves the right to
make component changes, design changes, or specification changes when necessary
and without notice.
SERVICE INFORMATION
Do not return this product to your retailer.
Please contact our customer service
department at 1-877-362-4271
LIMITED WARRANTY
90 DAY LIMITED WARRANTY ON PRODUCT COMPONENTS EXCLUDING PUMP
STANLEY FATMAX
®
warrants to the original purchaser that the wheels, gun, hose, wand,
spray nozzle(s) and other components of the
STANLEY FATMAX
®
pressure washer covered
under this warranty are free from defects in material and workmanship for 90 days from the
date of purchase.
