Stanley Fatmax SFMCST933, Оригинальное руководство пользователя

Страница: 12 / 48

10
English
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Do not expose the tool to rain or high humidity
or leave outdoors while it is raining.
Switch the tool off. Before performing any
maintenance on the tool, remove the battery
from the tool.
Keep people and animals at least 6 m away
from the work area.
Keep bystanders away.
96
Directive 2000/14/EC guaranteed
sound power.
Date Code Position (Fig. J)
The date code
18
, which also includes the year of manufacture,
is printed into the housing.
Example:
2021 XX XX
Year of Manufacture
Description (Fig. A)
WARNING:
Never modify the power tool or
any part of it. Damage or personal injury could result.
1
On/Off trigger
2
Lock-off button
3
Speed control switch
4
Main handle
5
Auxiliary handle
6
Height-adjust collar
7
Turn-to-edge collar
8
Trimmer head
9
Wire edge guide
10
Spool housing
11
Guard
12
Battery housing
13
Battery pack
14
Battery release button
15
Auxiliary handle
adjustment buttons
Intended Use
This Grass Trimmer is designed for professional
trimming applications.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
This is not an edger and is not intended to be used for edging.
DO nOT
let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS
WARNING:
To reduce the risk of serious
personal injury, turn tool off and disconnect battery
pack before making any adjustments or removing/
installing attachments or accessories.
An accidental
start-up can cause injury.
WARNING:
Use only STANLEY FATMAX
battery packs and chargers.
Inserting and Removing the Battery Pack
from the Tool (Fig. F)
NOTE: Make sure your battery pack 13 is fully charged.
To Install the Battery Pack into the Tool
1. Align the battery pack 13 with the rails inside the tool
(Fig. C).
2. Slide it into the tool until the battery pack is firmly seated
and ensure that you hear the lock snap into place.
To Remove the Battery Pack from the Tool
1. Press the release button 14 and firmly pull the battery pack
out of the tool handle (Fig. F).
2. Insert battery pack into the charger as described in the
charger section of this manual.
Fuel Gauge Battery Packs (Fig. F)
Some STANLEY FATMAX battery packs include a fuel gauge
which consists of three green LED lights that indicate the level
of charge remaining in the battery pack.
To actuate the fuel gauge, press and hold the fuel gauge
button
25 . A combination of the three green LED lights will
illuminate designating the level of charge left. When the level
of charge in the battery is below the usable limit, the fuel gauge
will not illuminate and the battery will need to be recharged.
NOTE:
The fuel gauge is only an indication of the charge left on
the battery pack. It does not indicate tool functionality and is