11
MAINTENANCE
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
REPLACEMENT PARTS
Use only identical replacement parts. For a parts list or to order parts, visit our service website at
www.stanleytools.com.
You can also order parts from your nearest
Stanley FatMax
Factory
Service Center or
Stanley FatMax
Authorized Warranty Service Center. Or, you can call our
Customer Care Center at
(800) 262 2161.
SERVICE AND REPAIRS
All quality tools will eventually require servicing and/or replacement of parts. For
information about
Stanley FatMax
, its factory service centers or authorized warranty
service centers, visit our website at
www.stanleytools.com
or call our Customer Care
Center at
(800) 262 2161
. All repairs made by our service centers are fully guaranteed
against defective material and workmanship. We cannot guarantee repairs made or
attempted by others.
You can also write to us for information at
Stanley Tools
, 701 E. Joppa Road, Towson,
Maryland 21286 - Attention: Product Service. Be sure to include all of the information
shown on the nameplate of your tool (model number, type, serial number, etc.).
ACCESSORIES
WARNING:
Since accessories, other than those offered by
Stanley FatMax
have
not been tested with this product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only
Stanley FatMax
recommended accessories
should be used with this product.
A complete line of accessories is available from your
Stanley FatMax
Factory Service
Center or a
Stanley FatMax
Authorized Warranty Service Center. Please visit our Web
Site
www.stanleytools.com
for a catalog or for the name of your nearest supplier.
Troubleshooting
Problem
Possible Cause
Possible Solution
• Unit will not start.
• Battery pack not installed properly.
• Check battery pack
installation.
• Battery pack not charged.
• Check battery pack
charging requirements.
• Battery pack will not charge. • Battery pack not inserted into charger. • Insert battery pack into
charger until green LED
appears.
• Charger not plugged in.
• Plug charger into a
working outlet. Refer to
“Important Charging Notes”
for more details.
• Surrounding air temperature
• Move charger and battery
too hot or too cold.
pack to a surrounding air
temperature of above 40
degrees F (4.5°C) or below
105 degrees F (+40.5°C).
• Unit shuts off abruptly.
• Battery pack has reached its
• Allow battery pack to cool
maximum thermal limit.
down.
• Out of charge. (
To
• Place on charger and
maximize the life of the
allow to charge.
battery pack it is designed
to shutoff abruptly when
the charge is depleted.
)
For assistance with your product, visit our website at
www.stanleytools.com
for a list of
service centers, or call the
Stanley FatMax
Customer Care Center at
(800) 262 2161.
90577313 FMC040 12 V Impact Driver.qxd:??????-00 Cir Saw book 8/3/11 2:35 PM Page 11
