Stanley CT06, Руководство по безопасности и эксплуатации

Страница: 6 / 31

1. Introduction CT06 Hydraulic Crimping Tool
Page 2
Specifications
The weights, dimensions, and operating specifications listed in Table 1–1 are
subject to change without notice. Where specifications are critical to your
application, contact your authorized Stanley distributor.
Table 1–1. CT06 specifications.
I t e m English Units Metric Units
System type HTMA Type I or II, OC or CC
Hydraulic power input*
Flow range 3–9 gpm 11–34 lpm
Optimum flow 8 gpm 30 lpm
Pressure (minimum) 1650 psi 114 bar
Compression tooling
Anderson VC6-FT, FC6-FTV, FC6-FTR, or FC6-FTVR
Crimping force 6 tons @ 1650 psi 5443 kg @ 114 bar
Wire-size capacity See tooling manufacturer’s specifications
Porting size –8 SAE
Weight ____ lb ____ kg
Dimensions
Length____ in. ____ cm
Width ____ in. ____ cm
*Refer to Section 3, Table 3–1, for detailed hydraulic system requirements.
Replacement Parts
Always replace hoses, couplings, and other parts with replacement parts
recommended by Stanley Hydraulic Tools. Refer to the parts list at the end
of this manual for part numbers.