Stanley CT06, Руководство по безопасности и эксплуатации

Страница: 9 / 31

Page 5
Stanley Hydraulic Tools 2 Safety
General Safety
The Stanley CT06 Crimping Tool will provide safe, dependable service if
operated in accordance with the instructions given in this manual.
• Before operating the tool, read and understand the manual and any
decals, labels, or tags attached to the tool and hoses. Failure to do so can
cause serious personal injury or damage to the equipment.
• Make sure all critical tool markings, such as labels and warning decals,
are securely in place and legible. Replace any that are damaged or
missing.
• Do not operate the tool unless thoroughly trained or under the
supervision of an instructor.
• Always replace hoses, couplings, and other parts with replacement parts
recommended by Stanley Hydraulic Tools. Refer to the parts list at the
end of this manual for part numbers.
• To avoid personal injury or equipment damage, all tool maintenance,
repair, and service must be performed by properly trained personnel.
Personal Safety
• Always wear safety equipment such as goggles, head protection, and
safety shoes when operating the tool.
• Never wear loose clothing or unrestrained long hair that can get
entangled in the working parts of the tool.
Equipment Safety
• Do not operate the tool if it is damaged, improperly adjusted, or
incompletely assembled.
• Always operate the tool within its rated capacity.
• Do not use the tool for applications for which it was not designed.
Work Area Safety
• Do not allow bystanders in the work area. Flying or falling debris can cause
serious injury.
• Be aware of any prohibited or dangerous work areas and conditions, such as
steep slopes or other unsafe terrain.